| 設備簡介： 此產品為充填房內過濾室內空氣，凈化空氣之用。通過頂部的FFU吹出空氣，經過高效濾網過濾后送入潔凈室內，已達到室內外空氣交換循環的效果。
•設計范圍要求(Design requirement)
•
•灌裝設備的千級正壓罩(Positive pressure clean room cover of the filling
equipment)
•設計依據(Design basis)
• 1 潔凈廠房設計規范 GB50073-2001
• Code for design of clean room GB50073-2001
•設計環境(Design environment):
•工廠車間（溫 度：0 - 40℃ 濕 度：40-95％）
•Factory shop (
temperature : 0-40℃ / humidity
:40-95% )
•完工后充填區技術參數要求：
(以靜態檢測為依據)
•The filling area
technical data requirements for shop test: (Based on static condition test)
•配置充填區總送風量實際使用大于18000 m3/h
•The air volume for filling area,
18000 m3/h
•系統用電總功率5kw（不包括報價以外的設備）
•Total system power consumption 7kw
(Does not include the devices other than our quoted)
•正壓罩千級換氣次數要求≥ 180次/時換氣次數。
•The required number of the air
interchange ≥ 180 times per hour
•端面出口風速大于0.4M/s
•The air speed beside the outlet of
FFU: 〉 0.4M/s
|
